The Full Scope of Industrial Electrical Services: What AMPS Logics Electric Handles Across the GTA
Industrial electrical work is not one service; it is a program. A facility that only calls its electrician when something breaks is missing most of the picture. The electrical systems in an industrial environment require ongoing maintenance, engineering level analysis, proper commissioning, and a reliable emergency response capability. At AMPS Logics Electric, we provide all of it for industrial and commercial clients across Toronto, Etobicoke, King City, and the wider GTA. Here is a clear look at every service we offer in our industrial division and what each one actually does for your facility.
Preventative Maintenance
Scheduled inspection and servicing is the foundation of a reliable industrial electrical program. Our technicians follow NETA aligned procedures to inspect switchgear, transformers, breakers, and distribution equipment on a cycle built around your operation. Thermographic scanning identifies developing hot spots at connections and bus bars. Insulation resistance testing catches cable and winding degradation that visual inspection would never find. Every visit produces a written report with photographs and prioritized recommendations so you always know what was found and what to do next.
Engineering Services
Industrial electrical systems carry enough energy that a design oversight becomes a safety incident. Our engineering services include coordination studies, which ensure the right breaker trips first during a fault so the rest of the facility stays energized; arc flash studies, which calculate incident energy at each panel and specify the protective equipment your workers need; ground grid studies, which verify that fault current has a safe path and that step-and-touch voltages are within safe limits; system design and approval; and independent witness testing of installed equipment before it goes into service.
Electrical Services
From a single circuit addition to a full facility distribution upgrade, we handle major and minor industrial electrical projects under one ESA licensed team. That includes new installations, system expansions, retrofits, power monitoring to track consumption and catch inefficiencies, and standby generator installation for facilities that cannot afford to be without power. Scoped, installed, tested, and backed by 24/7 support after the job is done.
Temporary Generator Setup
When a planned maintenance shutdown, an unexpected outage, or a construction project requires temporary power, we deploy fast. Every temporary generator setup we provide is fully cabled, connected, and load tested on site before you rely on it. We serve planned shutdowns and emergency situations equally, and our 24/7 availability means timing is never a barrier.
VFD and Drive Support
Variable frequency drives and soft starters are among the most maintenance-sensitive components in an industrial facility. When parameters are left on factory defaults rather than configured for the actual motor and load, the result is nuisance trips, wasted energy, and premature wear. We commission new drives correctly from day one, troubleshoot fault codes and recurring trips down to the root cause, and provide ongoing maintenance and load testing to keep motor control equipment reliable across a wide range of manufacturers.
Power Quality Analysis and Monitoring
Harmonics, voltage sags, transients, and phase imbalance are invisible without the right instruments. They show up instead as equipment that runs hot, breakers that trip for no clear reason, and motors that fail well ahead of schedule. We connect calibrated power monitors to your system, capture what is actually happening over time, and deliver a detailed report with prioritized corrective recommendations; not raw data, but a plan you can act on.
Commissioning
Commissioning is the step that proves a new or upgraded electrical system is ready to be trusted. Our process covers verification of protective relay settings against the design, interlock checks, point to point control wiring verification against drawings, and functional testing under operating conditions, all completed before the system is energized. Catching a wiring error or a misconfigured relay during commissioning costs a fraction of discovering it through equipment damage or a safety incident after the fact.
24/7 Emergency Response and Repairs
Industrial electrical emergencies do not follow business hours, and neither do we. When a fault takes critical equipment offline, our team mobilizes around the clock to diagnose and restore service. The same technicians who maintain your systems and understand your facility are the ones who respond when something goes wrong, which means faster diagnosis and fewer surprises on the repair bill.
One Team, Full Scope
The value of a single ESA-licensed contractor across all of these services is continuity and accountability. There is no handoff between a maintenance provider and an emergency responder, no knowledge gap when something unfamiliar shows up, and no ambiguity about who is responsible when a problem needs to be resolved. If your GTA facility is looking for an industrial electrical partner that can cover the full program, call (647) 648-4507 or visit theamps.ca to start the conversation.
